Effective Waterproofing Removal: Try the 250mm Schwamborn Concrete Grinder

Most professionals in the concrete grinding industry agree that the DSM250 concrete grinder is one of the best machines on the market for concrete preparation, grinding, floor leveling, and glue removal. The 250mm Schwamborn Grinder is one of the best machines for:

  • Concrete grinding and floor preparation
  • Glue, coating, and adhesive removal
  • Resurfacing concrete floors
  • Levelling and grinding down high spots
  • Removing epoxy coatings, cover Crete, spray pavin,g products and resurfacing projects
  • Grinding off waterproof membranes

 

BEST WAY TO GET RID OF STUBBORN WATERPROOFING MEMBRANE

Waterproofing removal from concrete surfaces can be a tough project. On a recent project, one of our customers was awarded the rectification of a filed waterproofing membrane for a residential high-rise apartment. A previous contractor had applied a membrane that had failed so needed to be removed, and the concrete prepared for a new system to be reapplied.

With the membrane being well bonded and all, it was surely a tough case to crack. With the Schwamborn 250mm Concrete Grinder the project was easier than ever, ripping the membrane off and back to bare concrete in the shortest possible time!

 

GET THE RIGHT PCD GRINDING SHOE FOR THE JOB

To ensure the best possible product with the concrete grinder the right selection of diamonds was critical. Using a RHINO II PCD diamond grinding shoe, the membrane could be effectively removed getting mostly back to bare concrete. For sections of the waterproofing membrane that were thicker, a follow-up on these with a 20-grit diamond was used to help rip off any excess product to ensure the concrete was clean and ready to reapply a new membrane.

 

LET'S TALK

Contact the team at All Preparation Equipment about your next waterproofing membrane or concrete preparation project, ph. 1800 422 992

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.