Grinding, cutting and polishing wet means wet concrete, water and product going everywhere. Managed right Grinding, cutting and polishing wet can be a GAME CHANGER which is why at All Preparation Equipment we've partnered with the very best in the industry. 

Slurry Solutions products include SlurrySAFE , SlurryDRY and SlurrySEP to help manage slurry waste in the construction industry without sacrificing time and safety in the workplace. 

If concrete Slurry is not disposed of effectively, it can make it's way to our stormwater systems and water ways causing significant environmental damage. 

We have had a combined experience of over 60 years in the construction industry and have witnessed first-hand the risks and impact of using hydrochloric acid. It is no secret that hydrochloric acid is a corrosive and toxic substance with many proven associated dangers for the user and the environment. Our safe alternative can replace hydrochloric acid in almost every use.

At All Preparation Equipment, it's our mission to make Tough Jobs Easy - alongside eliminating the hazards associated with traditional acids and offer safe slurry management onsite. Our range of high-performance, non-hazardous, biodegradable and multipurpose products will ensure your compliance with the most stringent Australian and International guidelines pertaining to Occupational Health and Safety requirements and environmental regulations.

Available to purchase online or instore in 1L, 5L and 20L Drums. Shop the Slurry Solutions SlurrySAFE AR Drums here, 

https://www.allprep.com.au/product/slurrysafe-ar-1-litre-patented-synthetic-acid-ph-control

https://www.allprep.com.au/product/slurrysafe-ar-5-litres-patented-synthetic-acid-ph-control

https://www.allprep.com.au/product/slurrysafe-ar-20-litres-patented-synthetic-acid-ph-control

WHAT IS SLURRYSAFE?

SlurrySafe is a patented Synthetic Acid Replacement. 100% Biodegradable. Triple Zero Hazardous Material Score.

Is SlurrySafe an acid?

No, SlurrySafe is not an acid, but acts similar to full strength hydrochloric acid.

What can SlurrySafe clean?

Slurry build-up, Concrete, Stucco, Brick, Stone, Plaster, Sheetrock Mud, Hard Water Scale, Etc.

Will SlurrySafe neutralize High pH waste water?

Yes, SlurrySafe has a pH of below 1 and is effective on reducing high pH water.

Can I clean Equipment?

Yes, SlurrySafe is very effective on cleaning equipment that has dried slurry build-up. Pressure wash to remove the heavy build-up, then spray on surface to clean down to metal surface.

Will SlurrySafe damage Paint?

No, SlurrySafe will not damage paint, rubber, hoses, or most metals. Do not soak aluminium or soft metal parts which could etch.

Can SlurrySafe clean diamond Tools?

Yes, Soak Tools in SlurrySafe to remove build-up in tooling. The Velcro backing will also be cleaned.

Can SlurrySafe etch concrete?

Yes, do not clean equipment on finished floors. Clean in a contained area and recycle liquid for compliant disposal. If needed, SlurrySafe can be used as a grinding aid for hard trowelled concrete surfaces.

Do I need to neutralize after using SlurrySafe?

Yes, it is advised to neutralize to stop the cleaning action. Neutralization can be accomplished with water or a high pH solution rinse. Flash rusting could occur due to the bare metal oxidation. This is not damaging, but oil spray is recommended for appearance.

Does SlurrySafe remove oil from concrete surface?

Yes, scrub into oil stains to emulsify oil and vacuum. Repeat until clean. Rinse and neutralize for best results.

ALL PREPARATION EQUIPMENT - YOUR SPECIALIST SUPPLIER FOR CONCRETE FLOOR PREPARATION, GRINDING, LEVELLING, CONCRETE FLOOR POLISHING, DUST CONTROL EQUIPMENT - MAKING TOUGH JOBS EASY.