5Kg Natural Grey Nano Cement and Repair
5Kg Natural Grey Nano Cement for super-fine pinholes, small air voids, pop-outs, cracks and other gaps in concrete.
SKU:FL-NC-GREY5KG
Order by 2pm for Same Day Dispatch
    
Couldn't load pickup availability

Product Information
PyraFix Nano-cement for concrete fills super-fine pinholes. small air voids, pop-outs. cracks and Other gaps in the concrete surface to create a monolithic surface ideal for all polished concrete applications.
PyraFix Nano-Cement is available in white and natural grey. All PyraFix Nano-Cement colours are available upon request. Ideal for all Concrete surfaces including polished concrete floors and bench tops. Designed for Superior finish.
Crack Repair
- Identify and solve the cause of the cracking.
 - Do a small test area first.
 - Thoroughly clean the crack and adjacent area through careful brushing. vacuuming, blowing and/or wet washing. Keep the crack edges as vertical and sharp as possible. Do not vee.
 - Hand buff with a 200 Grit C2 Diamond Impregnated Pad, wet 100 grit resin polishing pad or 100 grit rubbing block.
 - Mix 300g PyraFix Nano-Cement with 100mI water
 - Spread along the crack with a spatula. push/rub in with your finger.
 - Leave for 24 hrs (4 hrs minimum)
 - Remove with wet/dry 100 resin polishing pad Bring surface finish to equate to surrounding area. e.g., 3000 for polished.
 
No concrete priming is required.
Polished Concrete Pinfix
- At grouting Stage, normally after 100 resins, thoroughly clean the floor.
 - Mix Nano-Cement. 1 00mI water to 300g Pinfix.
 - By hand, use grout spreader or dry machine with grouting plates.
 - Do manageable sections. say 3-6m at a time.
 - Let cure for 24hrs ("hrs minimum).
 - Remove with 100 resins (rubbing block or machinel wet Or dry.
 - Finish floor to the desired sheen.
 
No concrete priming is required.
Concrete Patch
- Thoroughly clean and prepared the area.
 - Mix PyraFix Nano-Cement in fix with up to 50% extra fine sand.
 - Shape.
 - Let Cure for 24hrs (4hrs minimum).
 - Finish to desired sheen.
 
First Aid
Signs and Symptoms of over exposure: Breathlessness, wheezing, cough, sputum production.
Swallowed: If swallowed, dilute by drinking large amounts of water. 00 not induce vomiting. Seek medical attention. In unconscious. loosen tight clothing and Lay the person On his/her left side. Give nothing by mouth to an individual who is not alert and Conscious.
Eye Contact: Remove contact lens. Flush with running water or saline for at least 15 minutes. Seek medical attention if redness persists or if visual changes occur.
Skin Contact: Wash with mild soap and water Contact physician if irritation persists or later develops.
Inhaled: Remove to fresh air. If shortness Of breath Or wheezing develops, seek medical attention.
Advice to Doctor: Treat symptomatically.
Transport and Storage There are no special requirements for storage and transport.

 Store Locator
 
          
            Login
            
          
Cart
        
    

