AirCHASER 125mm Dust Shroud with Aerodynamic Nozzle

Product Information

AirCHASER 125mm Dust Shroud with Aerodynamic Nozzle

Wall chasing on your angle grinder can now be made completely dust-free with the use of the AirCHASER 125mm Shroud. 

• Adjustable cutting depth - up to 12mm 
• Full view of the cutting zone 
• Effective design keeps the cutting blades cool
• Adjustable for ALL Angle Grinders
• Patented Design 
• Weighs only 450g! 

Instructions (comes with a diagram on the packaging of this shroud to make for easy fitting)

• Install the first blade on the bearing flange, screw the long nut, install the second plate and tighten it with the flange nut in the way the flange nut was, then center the second blade. Make sure that the blades are fixed properly. While using two blades the load on the angle grinder is increased. 
• Close the standard cover of the angle grinder with the Device by bracing it to the toes. 
• Set the grips on the pins of the cover clasping the standard cover of the angle grinder. 
• Tight the grips on the pins of the cover clasping the standard cover of the angle grinder. 
• Tight the rips with the fly-nuts providing the symmetry of the Device to the blade. 
• Fixation ofthe cutting depth level is performed by the fly nut. 
• The vent pipe of the Device is to be connected directly to the sprag hose of the vacuum cleaning. then the Angle Grinder is ready to work - DUST FREE. 
• *Using 2 blades with this device increases the load on the angle grinder. Avoid overheating and overloading of your angle grinder unit during use.

Usually chases in walls are made with diamond blades and a special chasing machine.

The best solution is our AirCHASER device for angle grinders.

Compared to a standard wall-chasing machine, it is lightweight, reduces the risk of overheating of the blade and is affordable in price.