1 2
FEATURED
  • img
  • img
  • img

C2 Stain Clean 20 Litres

C2 Stain Clean 20 Litres

$438.70 + GST
$438.70 + GST
Sale Contact Us
Shipping calculated at checkout.

C2SC-20

  • Order by 2pm for Same Day Dispatch
View full details

Product Information

C2 Stain Clean 20 Litres

C2 Stain Clean is a poultice cleaner for pulling stubborn oil and grease stains out of concrete. Just pour C2 Stain Clean on the embedded stain and it spreads out to make an instant poultice. No mixing, troweling, plastic covering or tape needed. As the poultice dries, it pulls the contaminants out of the substrate, capturing them in its highly absorbent blend of batter-thick surfactants, solvents and powders. After a 5-8 hour dwell, simply sweep up the dried poultice and its absorbed contaminants for easy disposal.

ADVANTAGES
  • Works on old, deeply set stains.
  • Easy to use. No mixing or scrubbing needed.
  • Works on concrete.
  • Leaves no residue.
  • Removes motor oil, brake and power-steering fluids, anti-freeze, hydraulic fluids, cooking oils, food grease and other oil-based stains.
  • Will not discolor concrete.

APPLICATION INSTRUCTIONS

Most oil and grease stains can be cleaned with one application. Severe, deeply embedded stains may redevelop after cleaning, requiring further applications.

  • Scrape debris and buildup from surface. Do not pre-wet.
  • Shake container well and pour onto the oilstained surface until the stain is completely covered. The batter-thick poultice will automatically reach its required thickness as it spreads out across the stain.
  • Let the poultice dry for 5?8 hours or overnight. Protect from pedestrian traffic and rain during dwell period. Regarding rain protection, a plastic ?tent? over the poultice will allow proper drying. Avoid using tightly adhered plastic covers. Dry times may vary with environmental conditions such as temperature, wind and humidity. The poultice surface develops cracks as it contracts and dries. A fully developed network of cracks indicates the poultice is completely dry.
  • Sweep up the dry powder and dispose. On porous substrates, pressure water rinsing may facilitate removal of poultice dust.

    • Contact the team at All Preparation Equipment to discuss your tooling requirements and other concrete chemical needs further, ph. 1800 422 992 or shop the range of options online on the below links:

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)