Deep Seal Natural - 20L

Product Information

REQUIREMENT:
To seal untreated concrete, paving and masonry products with the view to providing long term protection from staining, without affecting natural texture or appearance.

HOW TO SPECIFY:
All exposed surfaces shall be treated by 2 coats of DeepSeal Natural "W". The application rate is determined by consultation with a representative of Know How Concrete Technologies. Most surfaces 1 Litre = 4,7 m2 per coat. All surfaces to be clean and dry and free of loose materials.

HOW TO USE PRODUCT:
Apply two light even coats of DeepSeal Natural ?W? to surface with a brush, roller, lambs wool applicator or low pressure spray. Allow drying between coats (approximately 20,30 minutes depending on ambient temperature).

EFFECTS:
Reduction in water uptake, water-vapour permeability, concrete corrosion; Resistance to alkalis and carbons; UV Resistance; Surface left unchanged; Lower maintenance efforts and costs.

WHERE RECOMMENDED:
All natural unpainted masonry, concrete and pressed clay surfaces.

CLEAN UP:
All tools and equipment should be cleaned thoroughly with clean soapy water.